Skip to content
Free Shipping for all products.
Free Shipping for all products.
RC part 66: pinecone Forest 1 / 16 sg1603 - the cheapest drift RC remote control car?

RC part 66: pinecone Forest 1 / 16 sg1603 - the cheapest drift RC remote control car?

Tommy introduced several cheap RC remote control cars before. This time, he introduced a car with gyroscope and can drift. After the explosion abroad, Tommy knew that it was originally made in China. At the beginning, the selling price was good, about 200, but then the money went up...

The rendered pictures of the packaging box are very fancy, and it feels very sporty to look at the vehicle. There is also a 1 / 16 scale mark. 4WD stands for 4-wheel drive. ESP body stability system is actually a gyroscope.

There are two styles, i.e. changing the wheel hub style, 1603 Shanzhai arrma cross-border style, and the prototype of drift pickup truck. 1604 style is more common.

So Tommy chose 1603 to look better. The carbon fiber texture of the front lip, the headlights are still a variety of colors, and there are various special effects.

Its own accessories, charger, spare parts, sleeve and other tires for different purposes.

For example, the current 1603 is a drift tire, and the white wheel hub on it is an ordinary tire. Drift tire is pure plastic tire. The whole tire is plastic without outer ring. Because the friction is smaller, it is easy to break through the friction limit and facilitate drift. The painting of the car body is still good. It won't be too monotonous. The tail wing of the tail is also larger.

There are tail light stickers at the tail and diffusers at the bottom. The shape of the tail is very sporty. In addition, the lamp in the middle of the diffuser is a tail lamp, which can also be on.

There are tail light stickers at the tail and diffusers at the bottom. The shape of the tail is very sporty. In addition, the lamp in the middle of the diffuser is a tail lamp, which can also be on.

The chassis is very flat, with few screws. It's much less than 8 cars and 10 cars. There are anti-collision sponges in front, and the diffuser at the rear is well done.

Inside the 1603, there are 2 headlights in the front of the car shell. The chassis is a conventional layout. There are brush motor and steering gear on one side and electric harmonic battery on the other side.

The words "pay attention to high temperature" are also pasted on the outside of this small motor. There is space at the back. You can change it to a longer one.

 

The only shock absorber is the spring. There is no shock absorber oil. The preset compression degree of the shock absorber spring can be adjusted through the buckle.

2S 1200mAh 18650 battery can play for a lot of time.

The upper and lower swing arms are all plastic. It seems that the strength is enough for this kind of car. The wave box is not disassembled. I don't know what's inside.

For the front suspension, the front wheel still has a steel drive shaft, and the steering rod has spare parts. It is estimated that it is a perishable part.

The anti-collision sponge is better than that of large manufacturers. In order to fit the car shell, it is also cut. Generally, the anti-collision sponge is a whole piece, regardless of the fit with the car shell.

The video of drift is shown below. It comes with a gyroscope, which can be slightly assisted. Sometimes it is easy to shake the tail excessively.

In general, pinguolin 1603 car is cheap, but it has a good experience. Especially with its own gyroscope, you can simply experience the fun of drift. Moreover, it also has great refitting potential. Foreign countries have changed to extreme speed, running more than 80 km / h. The disadvantage is that later, the product actually increased a lot of money

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Previous article Naughty Dragon 1/16 E1 GAZ 71 Tracked Vehicle - Great value RC car
Next article Discovery your sky - zero Xplorer V

Leave a comment

* Required fields