Skip to content
Free Shipping for all products. Subscribe to use 10% Off code: RT10
Free Shipping for all products. Subscribe to use 10% Off code: RT10

19.5g URUAV UZ80 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera

$119.99



Introduction:

UZ80, a new DIY Series whoop likes UZ85, can be assembled easily without soldering DIY drone. 

With more simple and lighter. The ultralight power system and Canopy eqipped with runcam nano 3 camera, Let you enjoy super flying experience free indoor racing in narrow space.

UZ80,  the smallest Palm toothpick FPV Racing Drone, more flying fun is waiting for you to expand.


Features:

- The Best worth 1S toothpick PNP Kit in the market
- Only 19.5gram 1s Toothpick
- Smooth and Powerful
- Runcam Nano 3 FPV Camera

- Comes unassemble, Just Plug to build it, do not need solder, enjoy DIY Fun!


Specification:

Brand Name: URUAV
Model: UZ80

Item Name: 80mm F4 1S FPV Racing Drone
Wheelbase: 80mm
Size: 69mmx69mmx29mm (without propeller)
Weight: 19.5g (without battery)


0802 19000KV Brushless Motor Mode: 0802 19000KV 
Configu-ration: 9N12P
Stator Diamter:8mm
Stator Length: 2mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Weight(g): 1.8g
No.of Cells(Lipo): 1S only
HQProp 40mm 2-Blade Propeller Model: Micro Whoop 40mmx2
Item Name: 40mm 2-Blade Propeller
Propeller Diameter: 40mm    
Pitch:  1                              
Blades: 2
Material: Poly Carbonate
Hub Diameter: 5mm         
Hub Thickness: 5mm        
Shaft: 1.5mm 
Color: Gray
Quantity: 2 CW + 2 CCW ( in same color)
Weight: 0.24g
CRAZYBEE F4 Lite AIO Flight Controller
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky/DSMX/DSMX receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 5A 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV 
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Default protocol: DSHOT600
Onboard Frsky Receiver ( Optional)

SPI BUS receiver Frsky D8 Compatible
Compatible Non EU transmitter D8 model
Channels: 8CH

Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky Receiver  ( Optional) SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
Onboard 5.8G VTX Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 
Smartaudio ready
Runcam Nano 3 FPV Camera
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens: 2.3mm(M6.5) FOV 140°
Signal System: NTSC
S/N Ratio: >50dBElectronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm


Recommend Lipo Battery: ( NOT Included)

1S 250mAh, around 3:40mins ;   1S 300mAh, around 4:30mins

1S 450mAh, around 6:30mins;    1S 650mAh, around 9:00mins


Package Included:

1x 80mm Frame

1x F4 AIO ESC VTX Receiver Board ( Optional Receiver Version)

4x 0802 19000KV Motor

2x HQProp 40mm 2-Blade Propeller CW

2x HQProp 40mm 2-Blade Propeller CCW

1x Runcam Nano 3 FPV Camera



Customer Reviews

Based on 3 reviews Write a review