Betafpv HX115 SE F4 AIO 12A ESC 1S Ultralight 3 Inch Toothpick FPV Racing Drone BNF w/ 1102 Motor 25-200mW VTX Caddx ANT 1200TVL Camera
Introduction:
HX115 SE Toothpick Drone is an ultralight 3 Inch inch 1S Toothpick Quadcopter.
Equipped with a specially designed F4 1S 12A AIO Flight controller that integrates with 1S 12A ESC.
With 1102 motor and 3020 blade, the weight of the whole drone is lighter, the structure is simpler, the flight is smoother and powerful.
Features:
- Equipped with F4 1S 12A AIO Flight controller, which is specially designed for 1S 3 inch toothpick drone.
This FC can provide more power to meet the demanding flight requirements.
- Ultralight 39.15g, can enjoy 3-5 minutes flight time with BT2.0 450mAh 1S battery.
- Equipped with BETAFPV BT2.0 connector. it can support 9A continuous current and 15A burst while the PH2.0 connector uses 4.5A continuous current. It provides stable power and outstanding performance for HX115 SE Toothpick Drone.
- 1102 18000KV motor and durable HQ 3020 2- blade propellers, formed a highly efficient power system, which lays a foundation for excellent flight performance.
Specification:
Brand Name: Betafpv
Model: HX115 SE
Item Name: 115mm Wheelbase F4 1S 3 Inch FPV Racing Drone
Wheelbase: 115mm
Version: BNF ( SPI Frsky FCC D16 in default)
Weight: 39.15g appromixi.
|
F4 1S AIO 12A 4in1 ESC |
Weight: 4.74 g (without power cable and BT2.0 connector) CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection) Firmware version: betaflight_4.2.0_STM32F411 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: Intergrated SPI Frsky Receiver Motor Pin Connecter: 1.25mm Header Pins Mounting Hole Size: 29mm x 29mm (suitable for whoop pattern mounting hole) USB Port: Type-C |
| Onboard 12A 4in1 ESC |
Con. Current: 12A, Burst 25A Input Voltage: 1S ESC firmware: Z_H_30_REV16_7.HEX BLHeliSuite, and Bluejay Configurator. |
| 1102 18000KV Motor | Height: 15.2mm Weight: 2.95g /pc Shaft: φ1.5mm Motor Mount Holes: 6.6mm KV (rpm/V): 18000KV Input Voltage: 1-2S lipo Plug and cables: Micro JST-1.25 3-pin connector with 30AWG cables |
| HQProp 3020 2-Blade Propeller | Material: Poly Carbonates Length: 3 inches, about 76.2mm Shaft Mounting hole: 1.5mm Quantity: 4 CW & 4 CCW |
|
A01 5.8G 48CH 0/25/200mW VTX |
Output power: 0mW, 25mW and 200mW (Adjustable) - SmartAudio function is included in this VTX. - PitMode is supported on this VTX. - Dipole whip high sensitivity antenna.
|
| Caddx ANT 1200TVL FPV Camera | Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL MENU: Support Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Work Humidity: 20%~80% Weight: 2g (N.W.) |
| Lipo Battery | BT2.0 450mAh 1S Battery |
1x HX115 SE Toothpick Drone
1x BT2.0 450mAh 1S Battery
English
French
German
Indonesian
Italian
Japanese
Korean
Malay
Portuguese
Russian
Spanish