Skip to content
Free Shipping for all products. Subscribe to use 10% Off code: RT10
Free Shipping for all products. Subscribe to use 10% Off code: RT10

iFlight Chimera7 LR Analog 320mm SucceX-D F7 V2.1 5-6S 7 Inch Long Range Freestyle FPV Racing Drone BNF w/ 800mW VTX Caddx Ratel 1200TVL Camera





iFlight 7inch Long-Range Drone can carry bigger batteries to get the flight time to surf the swiss alps if you want!

Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends . 


- 6mm rigid arm design for more stiffness

- Top- and bottom battery mount option

- XING 2806.5 efficient wide stator motors

- GPS pre-installed for more safety at distance

800mW high power adjustable VTX

- TPU bottom stand for Gopro Mount is included. ( TPU Camera Mount is NOT Included)

- 360° TPU protection, FPV cam protection and antenna mounts


- Battery voltage LED status light (illuminated IF logo on the bottom)


Brand Name: iFlight

Model: Chimera7 LR Analog

Item Name: 320mm F7 4s / 6S 7 Inch Long Range FPV Racing Drone

Drone Wheelbase: 320mm

Optional KV Version: 1300KV ( for Long Range); 1800KV ( for Freestyle)

Optional Receiver Version: PNP ( without Receiver)

                                            TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)

Weight: 580.2g ( without Battery)

Chimera7 320mm Frame Kit

Wheelbase: 320mm



Main body dimension: 258*199mm



Bottom to top distance: 20mm



Arm thickness: 6mm



Bottom plate thickness: 3mm



Top plate thickness: 2mm

Upper(middle) plate thickness: 3mm



Camera plate thickness: 3mm (included TPU inserts)

SucceX-D F7 V2.1 TwinG Flight Controller

MCU: 216MHz STM32F722

Gyroscope: 2x ICM20689

Barometer: YES

Blackbox: 32MB

Betaflight OSD:  YES

BEC: 5V 2.5A / 9V 2.5A

Current sensor scale:  100

Inverter for SBUS input (UART2-RX)

Smartaudio & Tramp VTX protocol supported

Beeper pad: Yes

RSSI input pad: No

UARTs: 5

Motor outputs: 8

8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

BLHeli32 Telemetry:RX5

Input voltage: recommended 2-6S, MAX 8S

Firmware Target:   IFLIGHT_F722_TWING

Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm

Dimensions:  36x36mm

Weight: 7.5g

USB type-C

SucceX 50A BLHeli_32 4in1 ESC

MCU: STM32F051

Up tp 48kHz PWM frequency

Capacitance: 470uF/50V

Current Sensor: Yes

Input: 2-6S LIPO

Constant: 50A / Burst: 60A

BlHeli32 telemetry: Yes


Supports up to Dshot1200, Proshot, Multishot 

Target: iFlight-BL32-4IN1

Weight: 14.4g

Size: 43x39mm (including the power pads)

Mounting Hole: 30.5x30.5mm/Φ3mm

XING 2806.5 1300KV / 1800KV  Motor
Voltage: 2-6S
KV: 1300KV / 1800KV ( Optional)
Configuration: 12N14P
Bearing: NMB 11*5*5
Stator Diameter: 28
Stator Length: 6.5mm
Shaft Diameter: M5
No.of Cells(Lipo): 2-6S
Weight: 49.5g(with a short cable)
Motor mount hole: 19x19 φ3mm
Gemfan 7040 3-Blade Propeller

Quantity: 2 CW & 2 CCW

Color may vary

SucceX Force 5.8G 800mW VTX

Item: SucceX-Force 800mW adjustable VTX

Input Voltage: 7-36V

Output Voltage/ Max current: 5V 1A

12V Input Current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW

Channel: 40CH

Size: 36x36x3mm

- PIT/25mW/100mW/400mW/800mW

Caddx Ratel 1200TVL FPV Camera Brand Name: Caddx
Item Name: Ratel
Lens: 2.1mm
Image Sensor: 1/1.8" Inch starlight HDR sensor       
Horizontal Resolution: 1200TVL
FOV: 180 Degree
Min. Latency: 8ms
TV System: NTSC & PAL (changeable)
WDR: Super WDR (HDR)
Dimensions: 19x19x19mm
Wide Power Input: DC 5-40V
Weight: 8g (N.W.)/ 40.5g (G.W.)
Optional Receiver Version

PNP Without Receiver Version: NOT Included receiver

TBS Crossfire Nano RX Version: include a TBS Crossfire Nano RX

Lipo Battery ( NOT Included)

For 1300KV Version: Recommend 6S 4000-4500mAh Lipo Battery

For 1800KV Version: Recommend 6S 2600-3000mAh Lipo Battery 

Package Included:

1x Chimera7 Analog Drone

1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)

1x Caddx Ratel FPV Camera ( Built Well on Drone)

1x 5.8G 800mW VTX  ( Built Well on Drone)

1x 5.8G Albatross RP-SMA Antenna LHCP 150mm

2x Gemfan 7040 Propeller CW

2x Gemfan 7040 Propeller CCW

4x 20x250mm PU Leather Battery Strap (Color May Vary)


Customer Reviews

Based on 3 reviews Write a review